
High-Efficiency Bifacial Solar Harvesting — 880W Total Off-Grid Power
The Anker SOLIX 2× 440W Rigid Solar Panel Kit delivers up to 880W of combined rated solar generation engineered for permanent residential rooftops, RVs, cabins, and high-capacity portable power stations. Featuring an industry-leading conversion efficiency of up to 25% and advanced bifacial cell architecture, these panels capture sunlight from both the front and rear surfaces to maximize daily energy yields.
Built with rugged, weather-sealed IP68 construction and accompanied by 4× MC4 extension cables plus an MC4 to XT60i adapter cable, this plug-and-play dual-panel bundle connects directly to compatible Anker SOLIX power stations or off-grid solar charge controllers for reliable, decades-long clean energy.

- Industry-Leading 25% Conversion Efficiency: High-efficiency monocrystalline solar cells convert up to 25% of direct sunlight into usable electricity, generating 440W per panel (880W combined) even in compact mounting spaces.
- Bifacial Dual-Sided Power Capture: Transparent rear-side architecture absorbs reflected ambient light from rooftops, concrete, snow, or gravel—capturing up to 30% additional energy compared to standard monofacial panels.
- All-Weather IP68 Durability: Engineered to withstand harsh outdoor environments year-round with an IP68 waterproof and dustproof rating and an extreme operating range from -40°C to 85°C (-40°F to 185°F).
- Ready-to-Connect MC4 & XT60i Cabling: Includes 4× MC4 cables and an MC4 to XT60i cable right out of the box for straightforward integration with compatible Anker SOLIX power stations and solar arrays.
- 30-Year Linear Performance Guarantee: Built for multi-decade reliability and backed by up to a 10-year solar panel product warranty alongside a 30-year linear power output guarantee.
- Positive Power Sorting (0~5W): Strict factory quality grading guarantees every 440W panel meets or exceeds its rated wattage out of the box.

Specifications
What’s Included:
- 2× Anker SOLIX 440W Bifacial Rigid Solar Panels (46.3 lbs each)
- 4× MC4 Solar Extension Cables
- 1× MC4 to XT60i Solar Charging Cable
Specs per 440W Panel
| Category | Specification Details |
|---|---|
| Rated Maximum Power (Pmax) | 440W per Panel (880W Total Kit) |
| Conversion Efficiency | Up to 25% (with up to 30% Rear-Side Bifacial Gain) |
| Power Sorting | 0~5W Positive Tolerance |
| Voltage at Pmax (Vmp) | 33.21V |
| Current at Pmax (Imp) | 13.25A |
| Open-Circuit Voltage (Voc) | 39.16V |
| Short-Circuit Current (Isc) | 13.88A |
| Max System Voltage | 1,500V DC |
| Max Series Fuse Rating | 30A |
| Weatherproof Rating | IP68 Waterproof & Dustproof |
| Operating Temperature | -40°C to 85°C (-40°F to 185°F) |
| Dimensions (Per Panel) | 1,722 × 1,134 × 35 mm (67.8 × 44.6 × 1.38 in) |
| Net Weight (Per Panel) | 46.3 lbs (21.0 kg) |
| Warranty | Up to 10-Year Product Warranty & 30-Year Linear Performance Guarantee |
FAQs
Series vs. Parallel Wiring Check: Always verify the maximum solar input voltage (Voc) and amperage limits of your portable power station or charge controller before wiring both 440W panels together. Two panels wired in series combine to 78.32V Voc (exceeding 60V-max inputs like the C2000X Gen 2), whereas wiring in parallel maintains 39.16V Voc.
-
How does bifacial technology increase solar output?
Unlike traditional panels with an opaque backing, these bifacial panels feature a transparent rear layer that absorbs sunlight reflected off roofs, decks, concrete, snow, or water—capturing up to 30% extra power depending on your mounting surface and tilt angle.
-
How should I wire these two panels to an Anker SOLIX C2000X Gen 2?
The Anker SOLIX C2000X Gen 2 supports an 11V–60V solar input range (up to 800W max). Because a single 440W panel has an open-circuit voltage (Voc) of 39.16V, you must connect the two panels in parallel (keeping voltage at 39.16V) rather than in series (which would double voltage to 78.32V and exceed the 60V port limit).
-
Are mounting brackets included?
This bundle includes the 2× 440W rigid solar panels, 4× MC4 cables, and 1× MC4 to XT60i cable. Rigid mounting brackets or Z-brackets are sold separately to match your specific RV roof, ground rack, or residential roof type.
-
Can these panels stay permanently mounted outdoors?
Yes. Built with an IP68 weatherproof rating and rated for temperatures from -40°C to 85°C (-40°F to 185°F), they are engineered for permanent year-round outdoor installation.